ET517 CDMA GPS AVL

GPS/CDMA

800/1900MHz

Real time acquire

Path record

Emergency alert

Remote SMS control

Support SMS

Low consumption

Weight 400g

1. General

The ET517 CDMA AVL is an anti-theft satellite positioning system, combined with positioning, monitoring ,SOS alarm for help, advertising, vehicle scheduling, image capture and tracking functions of the new products, easy for operation, owns a full-featured, the main applies to vehicles and other mobile object location and tracking services. It fully supports the CDMA network data transmission function, CDMA platform which can be widely used in large-scale cluster monitoring, emergency scheduling, location-based services, traffic safety management and many other fields. Additionally, it can also be used for large-scale construction measurement, military surveying, precision timing, the mobile base station location, and other special areas.

This model features a strong, superior performance, applying for a variety of environments and works stably. Real-time location-based services also meet in the vehicle control and scheduling, logistics and personnel management, anti-robbery/ anti-theft and insure personal safety in case of wide range of needs emergencies cases.

2. Feature

Main Features

Ÿ Remote control monitoring for tracking and locating by CDMA

Ÿ Remote navigation when call back to monitoring centre

Ÿ Emergency help button set monitoring center

Ÿ Navigation by calling to the monitoring centre

Ÿ Disable/enable oil or electricity by remote control of monitoring centre

Ÿ GPRS Real-time tracking and locating continuously

Ÿ Route play back and reappearance of track

Ÿ SMS response between terminal device and monitoring centre

Ÿ Mileage statistics

Ÿ Over speed alarm / Boundary violation alarm / Electricity cut-off alarm

Ÿ Listen in to the vehicle

Ÿ GPS antenna ON/OFF alarm

Additional functions with extending accessories (Please note that additonal function need purchase these accessories seperately)

Ÿ Photo function by camera

Ÿ Character broadcasting

Ÿ Fuel detector(under R&D)

Ÿ Vehicle meter

Ÿ Broadcasting display

Ÿ Dispatching screen and car telephone (Telephone only available for Chinese version)

Detailed function

Ÿ GPS locating

Real-time checking the location of the vehicles, terminal device will automatically report position, monitoring Center will automatically pop-up map showing the current location of vehicles.

Ÿ Shooting scene photos

Ÿ Monitoring Center can be for any one vehicle at any time photo the scene pictures; can also be set in advance to allow vehicles to shoot up after the picture then transfer back to the centre.

Ÿ Character broadcasting

You can send a text to any vehicle installed with device; B268 can read the words and advertising with literal on screen. These text ads can be promotion from companies. It can also be daily affairs, what is more important： the owner can be press the SOS button help in case of emergency. For example, if robbery’s, touch the emergency button click will show "I am hijacked, please ask help from the police”

Ÿ Voice broadcasting

You can write a text, send to the vehicle, B268 will identify the text and then pronounce it by voice.

Ÿ Long-distance call conversation

Through the handle or dispatch screen can realize voice dialing. During a call, press the menu button for hands-free function.

Ÿ Timing of return

You can set freely for the time reporting back to the monitoring centre

Ÿ Oil and Electricity enable/disable

If special case, Monitoring center can remote control to cut off any vehicle’s circuits and gas immediately, of course, you can restore electricity supply at any time.

Ÿ Remote listen in

With the owner's permission, when the vehicle encountered the emergent situation, the monitoring center can dial to the device and listen in the vehicles, the terminal device will dial back to monitoring centre to feedback the information of the vehicles.

Ÿ Emergency help

When vehicle face emergency situation and need help, after the drive press emergency button, within 1 second, the alarm information will upload the location to monitoring center.It will be in accordance with the relevant procedures.

Ÿ Enter or exit the electronic fence alarm

Center can be set to one or more irregular range if out of the region the alarm will attributes, when the vehicles enter or exit the region set the scope, HE-101 will be prompted to enter the alarm region, at the same time trigger settings beyond the regional police, the center received alarm information later can be identified and the abolition of the police.

Ÿ Monitoring center can set the itinerary range for the vehicle,

When the vehicle goes cross the authorized regional scope, the terminal device will alarm to monitoring centre.

Ÿ Over speed alarming

Monitoring centre can set the max speed of any of the vehicle, will alarm to the monitoring centre if over speeded.

Ÿ Trigger alarm

When the low-level trigger detection line detects low-level signals, or when triggered by detection of high +12 V line to detect high signal to trigger alarm, terminal device will upload information to the monitoring center immediately.

Ÿ Electricity off alarming

When the power supply was cut off, B268 will send alarm immediately within 5 seconds for electricity off, at the same time to start back-up battery-powered (2 hours for work equipment).

Ÿ GSM blind spot information makes a report for compliment

When the vehicle drive to the GSM signal blind area, the car terminal will not be able to real-time reporting position, then the host will be automatically stored in the blind zone auto moving all positioning data, wait till the GSM signal back to normal, it will re-make a report after the central server to monitor

Main device, GPS Antenna, GSM Antenna, MIC, Double-lined 6P installing cable, Power controller,

Optional accessories： Conversation handle, Advertising screen, Dispatching screen, Camera

3. Specification

Communication module

Ÿ Communication modules can be used CDMA 1x, CDMA with voice and data communications

Ÿ Working voltage：3.3Vⅵ4.8V;

Ÿ Max electricity current：2A;

Ÿ CDMA working frequency：800/1900Mhz

Ÿ CDMA antenna ：50ヘ omni-directional antennas, more than 6db, wind-resistant strength of ∶ 50m / s

Ÿ Cable：50ヘ low loss coaxial cable;

Ÿ CDMA antenna connector：SLl6-K7／J7,BNC、SMA 90 degree angle

Locating module

1.Electrical Parameters

Ÿ Working voltage：3.3V

Ÿ Working current：80mA

Ÿ GPS receiver for satellite launches 1575.42MHz frequency of the C / A code

Ÿ Spread spectrum modulation signal

Ÿ Tracking Sensitivity：-158dBm

Ÿ Positioning accuracy：<15m

Ÿ GPS Channel：24 channels ;

Ÿ Warm start：>20S

Ÿ Cold start：>150s;

Ÿ Maximum update rate：4HZ

Ÿ Operating temperature range：-20∩~75∩

Ÿ Storage temperature range：-20∩~+85

2.Positioning parameters

Ÿ Latitude/longitude：Unit degree with second and minute ( ì,/∏,/∪),accuracy：0.01∪　

Ÿ Speed：Unit degree by one hour per bit(nm/h),accurency：0.1nm

Ÿ Course heading：Unit by minute (∏),accuracy：l5∏;

Ÿ Time：with standard Green's time format： yy-mm-dd-mm-ss,accuracy ：ls。

3.Precision error

Vehicle terminal positioning accuracy will not more than 15m; (95% of cases). Vehicle navigation speed is not more than 5km / h, the speed of display precision more than 0.3km / h; sail faster than 5km / h ,when the speed of display precision tolerance not more than 0.1km / h. (90% of cases)

Device parameter

Ÿ Volume：145mm*104mm*36mm

Ÿ Color：Black

Ÿ Weight：400G

Ÿ GPS reciever：24 channals

Ÿ Warm start：8s ; Cold start：45s

Ÿ Locating precision：〈15M 95%

Ÿ Speed precision：0.05M/S

Ÿ Update rate： once per second

Ÿ Input voltage range： 9V-30V DC

Ÿ Operating current： 120mA @ 12V

Ÿ Working environment： -20 ~ +70 ∩

Ÿ Battery back-up time： 1.5 ~ 2 hours