Generator Introduction:
Oxyhydrogen carbon remover is a new technology for engine carbon cleaning system. It uses water as source, through electrolysis water to produce hydrogen and oxygen. It use hydrogen as fuel, oxygen as sub-fuel, hydrogen and oxygen mixed gas also called brown gas. Brown gas has perfect catalyst combustion character. Hydrogen and oxygen flame has inwall adhesiveness figure, catalysis figure, high temperature figure. When burning, it could wholly burn oil dirt inside of the engine. After burning, only produce clean water. Dirty things together with water will drain out of the engine.
Oxyhydrogen engine carbon cleaning machine ( especially used for car/trucks), just use 40 minutes, will clean engine dirties. Increase horsepower, save fuel !

Correlation Table
Date of test procedure: 2009/6/17Vehicle: 1994MERCEDES BENZ-C180; Displacement: 1.8L; Kilometers: 95,272
Emission Type Before After 20min After 40min After Emission reduction rate
CO(%) 0.66 0.37 0.38 0.17 74%
HC(ppm) 414 417 145 99 76%
CO2(%) 14.1 14 11.8 14.5 -3%
O2(%) 1.34 1.53 4.16 1 25%
NOx(ppm) 73 89 71 18 75%

After Carbon Cleaning Effectiveness:
1. Immediately save oil( according to our test report, could save 11%–28% oil compared without carbon cleaning according to different cars and trucks)
2. Increase horsepower ( to original horsepower when you bought new )
3. Engine no shaking
4. Smooth to drive

Technology Parameter ( small types)
Model No HOGC-1500 HOGC-5500
Gas output flow
( liter/hr) 0–1500(adjustable) 0–5000(adjustable)
Working pressure
(bar) 0.5–0.8bar

Oxy-hydrogen fire temperature 2800 0C
Input power ( KW/hr ) 4.5 17
Input voltage AC 220V AC 380V, three phase
Water requirement Pure water or distilled water
Water consumption ( liter/hour ) 1 3.2
Equipment size (mm) 1050*690*600 1000X700X1000
Weight (kgs) 160
300

Application Cars(no large than 3.0) Trucks(large than 3.0)